HDC-05
The BreezeLite Windows 10 Mini PC features an Intel Cherry Trial Z8350 processor, 64GB storage (32GB on board & 32GB MicroSD card), 4GB DDR3 memory, Intel HD Graphics, Gigabit LAN, Dual Band WiFi 802.11n, Bluetooth 4.0, USB 3.0, HDMI, VGA, VESA...
US$269.00
Ex GSTUS$295.90 Inc GST... more info Sold Out HDC-04
Homann Designs
Ethernet Smoother Stepper Upgrade kit for the HDC-01 Controller. The kit converts the controller from parallel port control to Ethernet via the Warp9td Ethernet Smooth Stepper, for control by Mach3/4. The Kit contains the following items; 1 x...
US$228.00
Ex GSTUS$250.80 Inc GST... more info Sold Out GC-12
Homann Designs
The DB-9 stepper screw terminal Breakout board is a great complement to the Gecko Drive four axis G540 Stepper Drive system. It provides an easy way to connect the stepper motor cables to the G540 without soldering. The BOB has a 9 pin D-Type...
US$8.80
Ex GSTUS$9.68 Inc GSTAdd:
GC-13
Homann Designs
The DB-9 male screw terminal Breakout board is a great complement to the HDC-01 Four Axis controller system. It provides an easy way to connect cables to the DB9 male connector The BOB has a male 9 pin D-Type connector on one end...
US$6.90
Ex GSTUS$7.59 Inc GSTAdd:
GC-14
Homann Designs
The DB-9 Female screw terminal Breakout board is a great complement to the HDC-01 Four Axis controller system. It provides an easy way to connect cables to the DB9 female connector The BOB has a female 9 pin D-Type connector on one end...
US$6.90
Ex GSTUS$7.59 Inc GSTAdd:
LB-02
Labour cost for wiring a stepper motor. Note: Does not include connectors or cable.
US$17.50
Ex GSTUS$19.25 Inc GSTAdd:
