Motion Controllers

The Ethernet SmoothStepper is a motion control device that connects to the Ethernet port of a computer. It accepts commands from a software package such as Mach3, Mach4, and produce very high quality pulse trains that drive step & direction...

Works with UCCNC, Mach3 and Mach4 softwares Features: - Complete motion controller and breakout board solution in a single board. - 8 optically isolated high speed N-channel power mosfet transistor outputs.(NPN) - 9 non-isolated buffered TTL...

Works with UCCNC, Mach3 and Mach4 softwares Features: - Replaces 2 pieces of standard LPT ports. - Controls upto 6-axis simulteneously. - Works with the UCCNC software, Mach3 and Mach4. - Up to 400kHz step frequency operation. - Ethernet connection...

Works with UCCNC, Mach3 and Mach4 softwares Features: - Replaces a standard LPT ports. - Controls up to 6-axis simulteneously. - Works with the UCCNC software, Mach3 and Mach4. - Up to 100kHz step frequency operation. - USB connection to the...

1 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects  hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...

3 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects  hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...

Panel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 300mm length

Panel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 600mm length

USB B male to B Female Panel Mount Extension Cable 0.4m This cable is has a USB B panel mount socket on one end an a USB B plug on the other. It is a perfect solution when mounting a Smoothstepper inside a CNC enclosure.

Low Profile Header 26 Pin connector on one end. Female DB25 connector on the other end of the ribbon cable. 300mm length

Model No. MDR-10-5     Genuine Meanwell DIN Rail 5V DC 2A 10W  Power Supply 5Vdc 2A 10Watt Universal AC input/Full range Protections: Short circuit / Overload / Over voltage Cooling by free air convection Can be installed on DIN...

Model No. MDR-20-24   Genuine Meanwell DIN Rail 24V DC1.0A 20W  Power Supply 24Vdc 1.0A 20Watt Universal AC input/Full rangeProtections: Short circuit / Overload / Over voltageCooling by free air convectionCan be installed on DIN rail...

Works with the UC100, UC300, UC300ETH, UC400ETH and AXBB-E motion controllers * Please note that the UCCNC software is licensed per motion controller. One license key works with one motion controller only. The license keys are tied to the serial...

Single port opto-isolated breakout board. Features:  IDC26 port with standard LPT port pinout. 12 outputs and 5 inputs. All I/Os optical isolated with high speed 10Mbit/sec optocouplers. Open-drain Mosfet outputs for external relay control....

Dual port opto-isolated breakout board. Features:  2x IDC26 ports with LPT port pinout. One standard LPT port and one input type LPT port. 16 outputs and 18 inputs. All I/Os optical isolated with high speed 10Mbit/sec optocouplers. Open-drain...

Low Profile Header 26 Pin connector on one end. Male DB25 connector on the other end of the ribbon cable. 300mm length

This convenient adaptor allows you to convert a printer cable from a Female DB-25 to a male DB-25 cable. This adaptor is perfect for use with the CB-06 IDC26 to DB-25 cable when used with the Smoother Stepper and Geckodrive G540.

Low Profile Header 26 pin connector on one end. Low Profile Header 26 pin connector on the other end. 300mm ribbon cable in between.

The DigiSpeed-MC generates an isolated voltage interface for control of CNC equipment that requires an high frequency (2KHz - 100KHz) PWM input; The DigiSpeed-MC requires a regulated 5Vdc supply for operation. It is a perfect fit for your...

Model No. NES-15-05   Genuine Meanwell 5V DC 3A 15W  Power Supply AC input range 110V - 240V, 50/60HzOutput 5Vdc 3A Protections: Short circuit / Overload / Over voltageAuto Recovery after protectionLED Power Indicator Cooling by Free air...

USB 2.0 A to B Cable 3.0m  Conforms to USB 2.0 Standard 480MBPS USB 4 Pin (A) Male to USB 4 Pin (B) Male. This cable is ideal for use with the SmoothStepper motion controller and USB pendants.