CB-09
GeckoDrive Inc
Super flexible shielded four core cable perfect for stepper motors up to 3.5 A/Phase. This cable has been matched to work with the Gecko four Axis G540 Stepper Drives. Cable Outer Diameter 6.2mmRed, White, Black, Yellow ConductorsConductors: 11x0.2...
US$2.91
Ex GSTUS$3.20 Inc GSTAdd:
CB-10
Homann Designs
Super flexible four core cable perfect for larger stepper motors Cable Outer Diameter 7.5mmRed, Black, Blue, Yellow ConductorsConductors: 40x0.16mm2 OFCSold per Meter.
US$3.18
Ex GSTUS$3.50 Inc GSTAdd:
CB-27
GeckoDrive Inc
Super flexible shielded two core cable perfect for wiring up limit switches, or other components were good quality sheilded cable is needed. Cable Outer Diameter 6.2mm White, Blue Conductors Conductors: 24 x 0.2 mm2 Shield: 112 x 0.12 mm2...
US$2.91
Ex GSTUS$3.20 Inc GST... more info Sold Out CB-22
Homann Designs
This quality VFD cable is the ideal cable to run between your spindle and VFD. It is also suitable for other uses were screening from EMI is required. APPLICATIONS: Specifically designed low capacitance screened cable for connection between AC...
US$5.60
Ex GSTUS$6.16 Inc GSTAdd:
CB-21
Homann DesignsThis quality medium duty VFD cable is the ideal cable to run between your spindle and VFD. It is also suitable for other uses were screening from EMI is required. APPLICATIONS: Specifically designed low capacitance screened cable for connection...
US$4.60
Ex GSTUS$5.06 Inc GSTAdd:
CB-18
Homann Designs
1 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...
US$3.20
Ex GSTUS$3.52 Inc GSTAdd:
CB-19
Homann Designs3 metre Cat 5 RJ45 patch cable. Perfect for connecting your Ethernet SmoothStepper to your PC. RJ45 Panel mount female to RJ45 male 1.This cable connects hardware to a PC or Local Area Network (LAN) 2.Ideal for use with 10 Base-T, 100 Base-T and...
US$5.20
Ex GSTUS$5.72 Inc GSTAdd:
CB-17
Homann Designs
Panel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 300mm length
US$6.80
Ex GSTUS$7.48 Inc GSTAdd:
CB-26
Homann DesignsPanel Mount RJ45 extension cable. Perfect for mounting your Ethernet SmoothStepper inside your controller. RJ45 Panel mount female to RJ45 male CAT5 cable 600mm length
US$8.20
Ex GSTUS$9.02 Inc GSTAdd:
CB-11
GeckoDrive Inc
USB B male to B Female Panel Mount Extension Cable 0.4m This cable is has a USB B panel mount socket on one end an a USB B plug on the other. It is a perfect solution when mounting a Smoothstepper inside a CNC enclosure.
US$4.49
Ex GSTUS$4.94 Inc GSTAdd:
CB-06
Homann Designs
Low Profile Header 26 Pin connector on one end. Female DB25 connector on the other end of the ribbon cable. 300mm length
US$7.49
Ex GSTUS$8.24 Inc GST... more infoCB-20
Homann Designs
Female DB25 connector on one end. Male DB25 connector on the other end of the ribbon cable. 300mm Standard length
US$12.00
Ex GSTUS$13.20 Inc GST... more infoCB-12
Homann Designs
Low Profile Header 26 Pin connector on one end. Male DB25 connector on the other end of the ribbon cable. 300mm length
US$7.49
Ex GSTUS$8.24 Inc GST... more infoCB-13
Homann Designs
This convenient adaptor allows you to convert a printer cable from a Female DB-25 to a male DB-25 cable. This adaptor is perfect for use with the CB-06 IDC26 to DB-25 cable when used with the Smoother Stepper and Geckodrive G540.
US$7.09
Ex GSTUS$7.80 Inc GSTAdd:
CB-07
Homann Designs
Low Profile Header 26 pin connector on one end. Low Profile Header 26 pin connector on the other end. 300mm ribbon cable in between.
US$7.49
Ex GSTUS$8.24 Inc GST... more infoCB-01
Homann Designs
1.8 metre DB9 Female to DB9 Male Serial Cable.
US$5.95
Ex GSTUS$6.55 Inc GSTAdd:
CB-25
Homann Designs
This is a 2 metre printer port cable with a DB25 male connector on both ends. Perfect for connecting your CNC controller to your computer.
US$7.50
Ex GSTUS$8.25 Inc GSTAdd:
CB-24
Homann DesignsThis is a 5 metre printer port cable with a DB25 male connector on both ends. Perfect for connecting your CNC controller to your computer.
US$14.80
Ex GSTUS$16.28 Inc GSTAdd:
CB-16
Homann Designs
3 metre mains lead with SAA Plug to IEC320 line socket. Perfect for powering your CNC controller.
US$4.90
Ex GSTUS$5.39 Inc GSTAdd:
CB-15
Homann Designs5 metre mains lead with SAA Plug to IEC320 line socket. Perfect for powering your CNC controller.
US$14.80
Ex GSTUS$16.28 Inc GSTAdd:
CB-08
GeckoDrive Inc
150mm mains IEC320 Line plug to SAA Australian 3 pin mains socket.
US$9.85
Ex GSTUS$10.84 Inc GSTAdd:
CB-05
Homann Designs
USB 2.0 A to B Cable 3.0m Conforms to USB 2.0 Standard 480MBPS USB 4 Pin (A) Male to USB 4 Pin (B) Male. This cable is ideal for use with the SmoothStepper motion controller and USB pendants.
US$6.49
Ex GSTUS$7.14 Inc GSTAdd:
CB-02
Homann Designs
1.8 metre minidin Cable for connecting the DigiSpeed controller to the MiniDin breakout Board.
US$8.00
Ex GSTUS$8.80 Inc GSTAdd:
CB-03
Homann Designs
1.5 metre 3.5mm Stereo Cable for connecting your index pulse sensor to your breakout board via the DigiSpeed controller.
US$4.00
Ex GSTUS$4.40 Inc GSTAdd:
CB-04
Homann Designs
1.8 metre MiniDin Male to Female Extension Cable.
US$8.00
Ex GSTUS$8.80 Inc GSTAdd:
