SW-13
Homann Designs
Quality Omron Watertight Snap action micro switch with short Lever with roller suitable for limit and/or home switches. High-quality watertight , high-precision miniature Snap Action switch. Switch Body meets IP67 requirements Use of epoxy...
US$27.00
Ex GSTUS$29.70 Inc GSTAdd:
SW-11
Homann Designs
Quality Omron Watertight Snap action micro switch with short lever with roller suitable for limit and/or home switches. High-quality watertight , high-precision miniature Snap Action switch. Switch Body meets IP67 requirements Use of epoxy resin...
US$20.00
Ex GSTUS$22.00 Inc GSTAdd:
SW-14
Homann Designs
Quality Omron slot-type Photomicrosensor, prewired with a 1 metre cable. Ideal for home switches where repeatability is required. Can also be used for home switches. Non-modulated Through-beam type, Grooved Type (L-shaped) Appearance,...
US$14.95
Ex GSTUS$16.45 Inc GSTAdd:
SW-08
Homann Designs
Quality Omron Limit Microswitch with roller. Specifications Contacts Form : Normally Open (NO) and Normally Closed (NC) connectionsContact Material: Silver AlloyLever: 5mm RollerMechanical Life: 10,000,00 operations minimumElectrical Life:...
US$2.80
Ex GSTUS$3.08 Inc GSTAdd:
SW-02
Homann Designs
12 position single pole rotary switch . Perfect for your CNC Control Panel or Pendant. Configurable from 1 pole 2 position through to 1 pole 12 position. These switches have a removable ring with tab which can be inserted into the switch several...
US$3.00
Ex GSTUS$3.30 Inc GSTAdd:
SW-01
Homann Designs
Latching Emergency Stop Switch Essential for installations of CNC equipment. Latching actuator with rotating release and normally closed contacts. When the actuator is pushed in, the contacts open and the switch is latched, ensuring the equipment...
US$9.20
Ex GSTUS$10.12 Inc GSTAdd:
SW-10
Homann Designs
Key Latching Emergency Stop Switch Essential for installations of CNC equipment. Latching actuator with rotating release and normally closed contacts. When the actuator is pushed in, the contacts open and the switch is latched, ensuring the...
US$15.90
Ex GSTUS$17.49 Inc GSTAdd:
SW-12
Homann Designs
SPDT switch with black body and black actuator.Spade lug connections. This switch is ideal as an enable switch your CNC controller 240V 6A. Snap in fitting. Cutout size 6.5(W) x 19(H)mm
US$2.90
Ex GSTUS$3.19 Inc GSTAdd:
SW-07
Homann Designs
DPDT switch with black body and black actuator.Spade lug connections. This switch is perfect for your CNC controller 240V 16A. Snap in fitting.
US$3.69
Ex GSTUS$4.06 Inc GSTAdd:
SW-03
Homann Designs
P67 Rated Dome Pushbutton Switch Black Perfect for your CNC Control Panel or Pendant. IP67 rated for harsh environments. Low profile dome shapemomentary actionMounting hole 12mm
US$3.60
Ex GSTUS$3.96 Inc GSTAdd:
SW-04
Homann Designs
P67 Rated Dome Pushbutton Switch Red Perfect for your CNC Control Panel or Pendant. IP67 rated for harsh environments. Low profile dome shapemomentary actionMounting hole 12mm
US$3.60
Ex GSTUS$3.96 Inc GSTAdd:
SW-05
Homann Designs
Small Latching Emergency Stop Switch Essential for installations of CNC equipment. Latching actuator with rotating release and normally closed contacts. When the actuator is pushed in, the contacts open and the switch is latched, ensuring the...
US$17.00
Ex GSTUS$18.70 Inc GSTAdd:
SW-06
GeckoDrive Inc
IEC Chassis male power plug with an integral switch and fuse. Perfect for your CNC controller box. Cut-out dimensions 47mmx27.5mmDouble Pole Single Throw switch (DPST)Integral Fuse holder (Fuse not included)
US$7.50
Ex GSTUS$8.25 Inc GSTAdd:
