Stepper Motors

Super flexible shielded four core cable perfect for stepper motors up to 3.5 A/Phase. This cable has been matched to work with the Gecko four Axis G540 Stepper Drives. Cable Outer Diameter 6.2mmRed, White, Black, Yellow ConductorsConductors: 11x0.2...

Super flexible four core cable perfect for larger stepper motors Cable Outer Diameter 7.5mmRed, Black, Blue, Yellow ConductorsConductors: 40x0.16mm2 OFCSold per Meter.

This is a dual shaft bipolar  70oz-in Nema 23 Stepper Motor, suitable for smaller machines. Model Number: 17H27H-168-4B Specifications Size: Nema 17 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 70V Max Current: 1.68A Resistance:1.7ohm...

This is a dual shaft bipolar  155oz-in Nema 23 Stepper Motor, suitable for smaller Mills and lathes such as the Taig and Sherline machines. Model Number: 23H256-28-4B Specifications Size: Nema 23 (Size 57) Phase: 2 Phase Step Angle: 1.8 Degrees...

This is a dual shaft bipolar  269 oz-in Nema 23 Stepper Motor, suitable for smaller Mills and lathes such as the Taig and Sherline machines. Model Number: 23H276-28-4B Specifications Size: Nema 23 (Size 57) Phase: 2 Phase Step Angle: 1.8 Degrees...

This is a dual shaft bipolar  387oz-in Nema 23  (60mm) Stepper Motor. This is the maximum size motor that can be used with the Geckodrive G540, G250 and G251 Model Number: 24H290-35-4B Specifications Size: Nema 24 (Size 60) Phase: 2 Phase Step...

This is a dual shaft bipolar  570oz-in Nema 24 (60mm) Stepper Motor. Model Number: 24H2100-50-4B Specifications Size: Nema 24 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 50V Max Current: 5A Resistance: 0.6 ohm/phase Inductance: 2.1...

This is a single shaft bipolar  640oz-in Nema 34 Stepper Motor. Model Number: 4H280-60-4A Specifications Size: Nema 34 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 80V Max Phase Voltage1.8V Current: 6A Resistance: 0.3 ohm/phase...

This is a single shaft bipolar  1200 oz-in Nema 34 Stepper Motor. Model Number: 4H2120-60-4A Specifications Size: Nema 34 Phase: 2 Phase Step Angle: 1.8 Degrees Voltage: 80V Max Phase Voltage 3.3V Current: 6A Resistance: 0.55 ohm/phase...

The GC-02 DB-9 Breakout board is a great complement to the GeckoDrive four axis G540 Stepper Drive system. It provides an easy way to connect the stepper motor cables to the G540. The GC-02 BOB has a 9 pin D-Type male connector on one end and easy...

A neat solution to cover the stepper motor back side providing connector interface, motor wiringprotection and rear shaft (if applicable) protection. An aesthetic solution to a common problem Connector interface for easy maintenance and setup...

 A neat solution to cover the stepper motor back side providing connector interface, motor wiring protection and rear shaft (if applicable) protection. An aesthetic solution to a common problem Connector interface for easy maintenance and...