TC-01TurboTaig Upgrade Controller Board

• The TurboTaig is compatible with;
  • Mach1/Mach2/Mach3 (ArtSoft)
  • TurboCNC (DAK Engineering)
  • Other Step/Direction Control Software.
• Drivers for four 5V relay coil
• Processing of limit switches for four axes
• Input for Emergency Stop Switch
• Input connector for Spindle index pulse sensor*
• Output connector for PWM Speed control.**
  • * - Uses Relay 3 output
  • ** - Uses Limit switch line for A Axis.
    

TurboTaig User Manual